Inputs |
Number of Inputs: |
4 (Inputs 3 or 4 can be selected as an RTA mic input) |
Connectors: |
Female XLR |
Type: |
Electronically balanced/RF filtered |
Impedance: |
>40k ohm |
Maximum Input Level: |
Hardware selectable for +30, +22, +14, dBu |
Max input RTA Level: |
-10 dBu |
CMRR: |
>40 dB typical, >55 dB at 1kHz |
Input Gain Range RTA: |
10 dB to 70 dB w/60 dB typical |
Outputs |
Number of Outputs: |
8 |
Connectors: |
Male XLR |
Type: |
Electronically balanced, RF filtered |
Impedance: |
120ohm |
Output Transformers: |
Optional |
Max Output Level: |
+25.5 dBu into 1kohm |
|
+22dBu into 600ohm |
A/D Performance |
Type: |
dbx Type IV¢â Conversion System |
Dynamic Range line: |
>112 dB unweighted, 115 dB A-weighted |
Type IV¢â dynamic range: |
127 dB with transient material, |
|
A-weighted, 22kHz BW |
|
125 dB with transient material, |
|
unweighted, 22kHz BW |
|
119 dB typical with program material, |
|
A-weighted, 22kHz BW |
Sample Rate: |
48kHz |
A/D Wordlength: |
24 bits |
D/A Performance |
Dynamic Range: |
112 dB unweighted, 115 dB A-weighted |
Sample Rate: |
48kHz |
D/A Wordlength: |
24 bits |
System Performance |
Internal Wordlength: |
48 bits |
THD + Noise: |
0.003% typical at +4dBu, 1kHz, 0dB input gain |
Frequency Response: |
20Hz- 20kHz, +/-0.5dB |
Interchannel Crosstalk: |
<-85dB at 1kHz, 0dB input gain |
Pre EQ |
Type: |
One 31-band Graphic EQ per input channel, or |
|
9 band Parametric EQ per input channel |
|
RTA can be substituted for EQ in channels 3 and 4 |
Range: |
+/-12 dB range |
Notch Filters |
Number: |
1-5 per input channel not to exceed 10 for all input channels |
Pre Delay |
Length: |
680ms/channel |
Crossover: Type: |
1x2, 1x3, 1x4, 1x5, 1x6 |
|
2x3, 2x4, 2x5, 2x6, 2x7, 2x8, 3x4, 3x5, 3x6, 3x7, 3x8, 4x6, 4x8 |
Filter Type: |
Butterworth, Bessel, or Linkwitz-Riley |
Slope: |
6, 12, 18 or 24 dB/octave for Butterworth or Bessel filters |
|
12, 24, 36 or 48 dB/octave for Linkwitz-Riley filters |
Post EQ |
Type: |
Parametric |
Number: |
4 EQ bands per output channel |
Range: |
+/-15 dB range |
Dynamics |
|
Type: |
Compressor/Limiter with PeakStopPlus¢â |
Attack/Release: |
Program Dependent |
Linking: |
All 8 bands are linkable |
Post Delay (Driver Alignment) |
|
Length: |
170 ms per output channel |
Pink Noise Generator |
|
Position: |
Pink noise inserted on selected input(s) |
Phase Compensation |
|
Number: |
One per output channel |
Amount: |
0-180 degrees phase shift |
Output Polarity: |
Reversible |
Miscellaneous |
Output |
|
Transformers: |
Optional |
Network: |
Proprietary RS-485 Backbone |
GUI: |
RS-232 interface for computer display and configuration |
RTA Microphone: |
Optional |
ROM Upgrade: |
Flash upgradeable through RS-232 |
Power Requirements |
|
Watts: |
100-240V - 50/60 Hz |
|
35 Watts |
Dimensions: |
Height- 3.5" X Width- 19" X Depth 12.15" |
Weight: |
11lbs. |
Shipping Weight: |
12.5lbs. |